submitted by sidhujag to ethereum [link] [comments]
We are excited to participate and present Syscoin Platform's ideal characteristics and capabilities towards a well-rounded Reddit Community Points solution!
Our scaling solution for Reddit Community Points involves 2-way peg interoperability with Ethereum. This will provide a scalable token layer built specifically for speed and high volumes of simple value transfers at a very low cost, while providing sovereign ownership and onchain finality.
Token transfers scale by taking advantage of a globally sorting mempool that provides for probabilistically secure assumptions of “as good as settled”. The opportunity here for token receivers is to have an app-layer interactivity on the speed/security tradeoff (99.9999% assurance within 10 seconds). We call this Z-DAG, and it achieves high-throughput across a mesh network topology presently composed of about 2,000 geographically dispersed full-nodes. Similar to Bitcoin, however, these nodes are incentivized to run full-nodes for the benefit of network security, through a bonded validator scheme. These nodes do not participate in the consensus of transactions or block validation any differently than other nodes and therefore do not degrade the security model of Bitcoin’s validate first then trust, across every node. Each token transfer settles on-chain. The protocol follows Bitcoin core policies so it has adequate code coverage and protocol hardening to be qualified as production quality software. It shares a significant portion of Bitcoin’s own hashpower through merged-mining.
This platform as a whole can serve token microtransactions, larger settlements, and store-of-value in an ideal fashion, providing probabilistic scalability whilst remaining decentralized according to Bitcoin design. It is accessible to ERC-20 via a permissionless and trust-minimized bridge that works in both directions. The bridge and token platform are currently available on the Syscoin mainnet. This has been gaining recent attention for use by loyalty point programs and stablecoins such as Binance USD.
SolutionsSyscoin Foundation identified a few paths for Reddit to leverage this infrastructure, each with trade-offs. The first provides the most cost-savings and scaling benefits at some sacrifice of token autonomy. The second offers more preservation of autonomy with a more narrow scope of cost savings than the first option, but savings even so. The third introduces more complexity than the previous two yet provides the most overall benefits. We consider the third as most viable as it enables Reddit to benefit even while retaining existing smart contract functionality. We will focus on the third option, and include the first two for good measure.
Syscoin + Matic IntegrationMatic and Blockchain Foundry Inc, the public company formed by the founders of Syscoin, recently entered a partnership for joint research and business development initiatives. This is ideal for all parties as Matic Network and Syscoin Platform provide complementary utility. Syscoin offers characteristics for sovereign ownership and security based on Bitcoin’s time-tested model, and shares a significant portion of Bitcoin’s own hashpower. Syscoin’s focus is on secure and scalable simple value transfers, trust-minimized interoperability, and opt-in regulatory compliance for tokenized assets rather than scalability for smart contract execution. On the other hand, Matic Network can provide scalable EVM for smart contract execution. Reddit Community Points can benefit from both.
Syscoin + Matic integration is actively being explored by both teams, as it is helpful to Reddit, Ethereum, and the industry as a whole.
Proving Performance & Cost SavingsOur POC focuses on 100,000 on-chain settlements of token transfers on the Syscoin Core blockchain. Transfers and burns perform equally with Syscoin. For POCs related to smart contracts (subscriptions, etc), refer to the Matic Network proposal.
On-chain settlement of 100k transactions was accomplished within roughly twelve minutes, well-exceeding Reddit’s expectation of five days. This was performed using six full-nodes operating on compute-optimized AWS c4.2xlarge instances which were geographically distributed (Virginia, London, Sao Paulo Brazil, Oregon, Singapore, Germany). A higher quantity of settlements could be reached within the same time-frame with more broadcasting nodes involved, or using hosts with more resources for faster execution of the process.
Addresses used: 100,014
The demonstration was executed using this tool. The results can be seen in the following blocks:
It is important to note that this POC is not focused on Z-DAG. The performance of Z-DAG has been benchmarked within realistic network conditions: Whiteblock’s audit is publicly available. Network latency tests showed an average TPS around 15k with burst capacity up to 61k. Zero-latency control group exhibited ~150k TPS. Mainnet testing of the Z-DAG network is achievable and will require further coordination and additional resources.
Even further optimizations are expected in the upcoming Syscoin Core release which will implement a UTXO model for our token layer bringing further efficiency as well as open the door to additional scaling technology currently under research by our team and academic partners. At present our token layer is account-based, similar to Ethereum. Opt-in compliance structures will also be introduced soon which will offer some positive performance characteristics as well. It makes the most sense to implement these optimizations before performing another benchmark for Z-DAG, especially on the mainnet considering the resources required to stress-test this network.
Cost SavingsTotal cost for these 100k transactions: $0.63 USD
See the live fee comparison for savings estimation between transactions on Ethereum and Syscoin. Below is a snapshot at time of writing:
ETH price: $318.55 ETH gas price: 55.00 Gwei ($0.37)
Syscoin price: $0.11
Snapshot of live fee comparison chart
Z-DAG provides a more efficient fee-market. A typical Z-DAG transaction costs 0.0000582 SYS. Tokens can be safely redeemed/re-spent within seconds or allowed to settle on-chain beforehand. The costs should remain about this low for microtransactions.
Syscoin will achieve further reduction of fees and even greater scalability with offchain payment channels for assets, with Z-DAG as a resilience fallback. New payment channel technology is one of the topics under research by the Syscoin development team with our academic partners at TU Delft. In line with the calculation in the Lightning Networks white paper, payment channels using assets with Syscoin Core will bring theoretical capacity for each person on Earth (7.8 billion) to have five on-chain transactions per year, per person, without requiring anyone to enter a fee market (aka “wait for a block”). This exceeds the minimum LN expectation of two transactions per person, per year; one to exist on-chain and one to settle aggregated value.
Tools, Infrastructure & Documentation
Syscoin BridgeMainnet Demonstration of Syscoin Bridge with the Basic Attention Token ERC-20
A two-way blockchain interoperability system that uses Simple Payment Verification to enable:
APITools to simplify using Syscoin Bridge as a service with dapps and wallets will be released some time after implementation of Syscoin Core 4.2. These will be based upon the same processes which are automated in the current live Sysethereum Dapp that is functioning with the Syscoin mainnet.
DocumentationSyscoin Bridge & How it Works (description and process flow)
Superblock Validation Battles
HOWTO: Provision the Bridge for your ERC-20
HOWTO: Setup an Agent
Developer & User Diligence
Trade-offThe Syscoin Ethereum Bridge is secured by Agent nodes participating in a decentralized and incentivized model that involves roles of Superblock challengers and submitters. This model is open to participation. The benefits here are trust-minimization, permissionless-ness, and potentially less legal/regulatory red-tape than interop mechanisms that involve liquidity providers and/or trading mechanisms.
The trade-off is that due to the decentralized nature there are cross-chain settlement times of one hour to cross from Ethereum to Syscoin, and three hours to cross from Syscoin to Ethereum. We are exploring ways to reduce this time while maintaining decentralization via zkp. Even so, an “instant bridge” experience could be provided by means of a third-party liquidity mechanism. That option exists but is not required for bridge functionality today. Typically bridges are used with batch value, not with high frequencies of smaller values, and generally it is advantageous to keep some value on both chains for maximum availability of utility. Even so, the cross-chain settlement time is good to mention here.
CostEthereum -> Syscoin: Matic or Ethereum transaction fee for bridge contract interaction, negligible Syscoin transaction fee for minting tokens
Syscoin -> Ethereum: Negligible Syscoin transaction fee for burning tokens, 0.01% transaction fee paid to Bridge Agent in the form of the ERC-20, Matic or Ethereum transaction fee for contract interaction.
Z-DAGZero-Confirmation Directed Acyclic Graph is an instant settlement protocol that is used as a complementary system to proof-of-work (PoW) in the confirmation of Syscoin service transactions. In essence, a Z-DAG is simply a directed acyclic graph (DAG) where validating nodes verify the sequential ordering of transactions that are received in their memory pools. Z-DAG is used by the validating nodes across the network to ensure that there is absolute consensus on the ordering of transactions and no balances are overflowed (no double-spends).
APISyscoin-js provides tooling for all Syscoin Core RPCs including interactivity with Z-DAG.
DocumentationZ-DAG White Paper
Useful read: An in-depth Z-DAG discussion between Syscoin Core developer Jag Sidhu and Brave Software Research Engineer Gonçalo Pestana
Trade-offZ-DAG enables the ideal speed/security tradeoff to be determined per use-case in the application layer. It minimizes the sacrifice required to accept and redeem fast transfers/payments while providing more-than-ample security for microtransactions. This is supported on the premise that a Reddit user receiving points does need security yet generally doesn’t want nor need to wait for the same level of security as a nation-state settling an international trade debt. In any case, each Z-DAG transaction settles onchain at a block target of 60 seconds.
Syscoin SpecsSyscoin 3.0 White Paper
(4.0 white paper is pending. For improved scalability and less blockchain bloat, some features of v3 no longer exist in current v4: Specifically Marketplace Offers, Aliases, Escrow, Certificates, Pruning, Encrypted Messaging)
WalletsWeb3 and mobile wallets are under active development by Blockchain Foundry Inc as WebAssembly applications and expected for release not long after mainnet deployment of Syscoin Core 4.2. Both of these will be multi-coin wallets that support Syscoin, SPTs, Ethereum, and ERC-20 tokens. The Web3 wallet will provide functionality similar to Metamask.
Syscoin Platform and tokens are already integrated with Blockbook. Custom hardware wallet support currently exists via ElectrumSys. First-class HW wallet integration through apps such as Ledger Live will exist after 4.2.
Current supported wallets
Syscoin Spark Desktop
ExplorersMainnet: https://sys1.bcfn.ca (Blockbook)
Thank you for close consideration of our proposal. We look forward to feedback, and to working with the Reddit community to implement an ideal solution using Syscoin Platform!
Table 1: Days LeadOut of 1334 days in the analysis, Bitmex futures leads the discovery in 571 days or nearly 43% of the duration. Bitfinex leads for 501 days. Bitfinex's high number is due to its extreme dominance in the early days.
Table 2: Correlation between the close price and Exchange's dominance indexBinance, Huobi, CME, and OkCoin had the most significant correlation with the close price. Bitmex, Coinbase, Bitfinex, and Bitstamp's dominance were negatively correlated. This was very interesting. To know more, I captured a yearwise correlation.
With the development of blockchain technology, obtaining data on the chain only is no longer satisfying and how to bridge the real world and the blockchain world has always been the direction of the technological breakthrough. Under this background, Oracle Machine came to our attention. In particular, with the popularity of the DeFi concept, the industry starts to witness a boom of the application of Oracle Machine in financial derivatives, trading platforms, gambling games, and prediction markets.submitted by ThemisOracle to u/ThemisOracle [link] [comments]
At present, Oracle Machine represented by Themis is developing fast with a good momentum, leading the trend of the development of Oracle Machine and continuing to consolidate the basic technical support for the DeFi revolution. Themis’ mining system has been launched in the market, which is refreshing and appealing (see https://themisoracle.com/#/credit for details on the Themis mining).
90% of MIS, the native token of Themis, will be used for mining output. The entire mining mechanism runs through a distributed oracle protocol, which sets up three roles: data provider, data validator, and arbitration node. Reward and punishment mechanisms are applied to ensure the smooth ecological operation.
How does Themis mining work? Is it a new way to become wealthy? What are the characteristics? To answer these questions, we need to analyse the distribution mechanism, mining mechanism, and token value of Themis.
With a fairer mining mechanism, small and medium-sized miners can enjoy better benefits
One of the core values of blockchain is fairness and justice, and allowing everyone in the network to play a role in the system without permission. However, Bitcoin mining is now monopolized by several mining machine vendors such as Bitmain, leaving little space for other miners to participate. If those old PoW public chains, such as Bitcoin, has formed the head effect in mining, what about those new projects? Let's take Cosmos as an example. Since Binance joined its validator node, it has instantly ranked top with the strong financial strength and user base of the top exchange, making the small and medium nodes hard to participate.
After comparison, we can find that the mining mechanism of MIS is very friendly to ordinary users. Assuming that there are 12 mining transactions in a block, the ranking according to the MIS pledged by each transaction would be as follow:
The pledge ranking is based on the jump ranking weighting algorithm rather than the weighted average of the user pledge amount, which can prevent MIS from being controlled by a small number of people, avoid monopoly, creating a win-win situation in the Themis community.
Compared with other mining projects, Themis has introduced a unique pledge ranking method in the mining design. Users in the best ranking area will get the most benefits, which is a good mechanism guarantee for attracting more users to participate in mining. At the same time, it can lead to the decentralization of data providers, ensuring the decentralization of the oracle system and the positive development of the community.
How can miners join in Themis mining? The answer is to become a part of the ecology by playing the role of either data provider, data validator, or arbitration node.
The data provider is mainly responsible for providing various types of data, and the data validator verifies and challenges the data offered by the data provider and provides new data. The arbitration node arbitrates the query raised by the data validator and come up with the final result.
Both the data providers and validators of Themis need to pledge MIS to obtain the qualifications, and the caller of external data also needs to pay MIS assets when accessing the data of Themis oracles. If the data has been verified as correct, data providers and validators will receive mining rewards, and the more they pledge, the more rewards they will receive.
In the mining design of Themis, miners can acquire MIS by providing verifiable random number or offering the price of in-chain assets. Whenever miners call mining contracts, the system will charge no service fee (excluding the service fee of ETH). In addition, if no mining transaction occurs within a certain period of time, the first newly-emerging block containing mining transactions will acquire all the MIS rewards. In this way, miners can be encouraged to continue mining and maintain the ecological stability of Themis.
The number of MIS mining for each mining transaction of miners is calculated as follows:
First, calculate the number of MIS mining rewards N contained in the block of the packaged mining transaction. If the height difference between the block and the previous block containing the mining transaction is y, then N = y * 20.
The MIS mining quantity of this mining transaction is M, then M=Xi/(📷)×N. Among them, X is the ranking of the MIS pledge amount in the block, and those who pledge the same amount of MIS have the same ranking.
Few official pre-mining, while 90% belongs to the community
Based on the official announcement, the distribution of MIS is:
The total amount of MIS is 1 billion, 10% is reserved for early project promotion, the remaining 90% are produced by mining, in which 75% are directly awarded to data providers, 10% to developers, and 5% as reward for arbitration nodes and ecological incentive. The production of mining will be progressively decreased and released with ETH. For some current popular VC-invested projects, institutional holdings hold more than half of blocks and unlock the block every month, which is a huge stress for ordinary pledge users. Many projects also went wrong because institutional investors do not abide by the rules. For MIS, because there is fewer official pre-mining, the selling pressure will be smaller, which is more in line with the value of the blockchain.
The release plan of developer and arbitration node and ecological incentive is as follows:
The release plan of data provider incentive is as follows:
The MIS awarded per block reduces by 10% in every 4 million blocks, and the reward per block at present is 20 MIS.
We can see that the allocation of MIS follows the following principles.
First of all, as MIS is the platform certificate of Themis, it is very reasonable to reserve 10% of MIS for early project promotion.
Secondly, 90% of MIS is produced through sustainable mining. This proportion can motivate contract users and miners to conduct contract mining, truly implementing the spirit of win-win community and token economy.
Finally, among the 90% of MIS, better incentive mechanisms have been adapted, mining reward ratios are subdivided, which can attract more investors to participate in mining.
Reasonable mining mechanism highlights the project value of Themis
Themis, as a public chain that provides a mechanism to solve the problems in Oracle Machine, has a unique charm in the value of MIS.
From the perspective of the number of tokens, the total amount of MIS is 1 billion, and the total mining pool is 900 million. 90% of the tokens are generated by mining, and the mining output gradually decreases its release with the Ethereum block, showing a great potential in its future added value. The earlier you participate in mining, the more profit you can gain.
From the perspective of Themis’s ecological design, Themis is committed to the original intention of building a price oracle. The data provider pays on-chain fees and pledges a certain amount of MIS, and determines the income obtained according to the scale of the pledge; the validator can make profit from challenging the data. Also, any smart contract developer or user need to pay the corresponding fee when calling Themis, and this part of the profit will be distributed to the data provider in proportion. Through this design, a logical closed loop is completed to ensure the healthy operation of the entire ecology and achieve the goal of mutual benefit. In Themis, all parties in the ecology can work together to grow more wealth.
In all, MIS has a huge potential for future development and arbitrage, and of course, a great profit potential as well.
Today, public chains like Themis are not just a technology platform, but also a symbol of future economic operation mode which connect between the blockchain and the real world. Themis, with a fair, justice and open network through mining, is building a strong token ecology, connecting external chain data and the systems, realising data interaction between blockchain and the real world, and more importantly, creating a new mode of token economy.
Written by TokenInsightsubmitted by CoinExcom to btc [link] [comments]
Published by tokenin.cn
OutlookThe development of CoinEx Chain contributes to the future development of CoinEx’s centralized and decentralized exchanges; the concept of trichain operation simplifies the functions of each chain, improving their performance. At present, there are few exchanges working on the public chain, and no fierce competition has occurred.
ConclusionConsidering the status and development prospects of the project, TokenInsight gives CoinEx a rating of BB with a stable outlook.
1. Multidimensional evaluation
2. Project analysisCoinEx (CoinEx Technology Limited) was established in December 2017 and is headquartered in Hong Kong, China. It is a sub-brand of the ViaBTC mining pool. At present, CoinEx’s business scope includes CoinEx exchange, CoinEx public chain, and CoinEx decentralized exchange. The current development focus of the CoinEx platform are public chain and exchange. The main purpose of the public chain is to build a decentralized exchange (DEX) infrastructure and an ecosystem around DEX.
CoinEx business structure，Source: CoinEx; TokenInsight
2.1 Introduction“ CoinEx Chain uses the parallel operation of three chains which are DEX, Smart, and Privacy, as well as cross-chain technologies to create a rich decentralized exchange ecosystem and blockchain financial infrastructure.
The core of CoinEx’s early business was the exchange, consisted of two major categories which were spot and derivatives trading. Currently, there are 123 trading currencies online, covering 302 trading pairs. On June 28, 2019, CoinEx released the CoinEx Chain public chain white paper, aiming to build a decentralized trading system (CoinEx DEX) with community-based operations and transparent transaction rules, and providing user-controlled asset trading scenario by the highest technical standards in the industry; CoinEx Chain has become another development focus of CoinEx. CoinEx Token (CET), which was originally a native token of the CoinEx exchange, will also be developed mainly as a built-in token of the public chain.
CoinEx Chain is a public chain based on the Tendermint consensus protocol and Cosmos SDK, and it uses POS mechanism. CoinEx Chain plans to support 42 nodes when the project starts, and any entity in the ecosystem can participate in the validator’s campaign by staking CET. CoinEx Chain will use the new block reward and the transaction fee contained in the block as the reward for running the node.
CoinEx Chain has developed three public chains with different positioning and different functions in order to meet the needs of blockchain transactions for transaction performance, smart contracts, and privacy protection at the same time. They operate in parallel and collaborate with each other through cross-chain technology. At present, the block time of the public chain is between 2–3 seconds. According to the observation of TokenInsight, the block time is stable, but the number of transactions through the CoinEx public chain is still low at present, the number of transactions in 24 hours is about 30,000; The TPS on public chain disclosed by CoinEx can reach up to 1500 per second.
CoinEx Chain uses a trichain parallel model to build a more vibrant ecosystem around DEX. The three chains are DEX public chain, Smart public chain, and Privacy public chain, respectively responsible for decentralized transactions, smart contracts, and on-chain privacy protection.
CETs that need to participate in complex financial contracts can be transferred to the Smart public chain through the DEX public chain, then moved back to the DEX public chain after that. CET tokens that need to participate in token confusion can also be carried out through the privacy transaction of the Privacy public chain, and can eventually be returned to the DEX public chain. The three public chains are responsible for their respective duties, and they are interconnected through the cross-chain technology through the relay mechanism. In addition to ensuring their respective transaction processing speed and functional attributes, they can also jointly provide richer and safer functions, and synergistically constitute the CoinEx decentralized public chain ecosystem.
In addition, CoinEx Chain also supports any participant to issue new tokens on the chain and create new trading pairs for the issued tokens. CoinEx Chain guarantees the circulation of new tokens by establishing a trading pair between the new token and CET.
2.2 Component architecture“ Tendermint Core and Cosmos SDK have improved the performance and operation capability of the blockchain. The SDK packaging reduces the consideration of non-related logic, hence reducing the development complexity.
CoinEx Chain is based on Tendermint Core and Cosmos SDK, both of which have brought a big boost to the development of CoinEx public chain performance. Cosmos-SDK will implement the application logic of the blockchain. Together with the Tendermint consensus engine, it implements the three-layer architecture of the CoinEx public chain: the application layer, the consensus layer, and the network layer.
Tendermint is based on the state machine replication technology and is suitable for blockchain ledger storage. It is a list of transactions making consensus with Byzantine fault tolerance, the transactions are executed in the same order, and eventually the same state is obtained. Tendermint can be used to build various distributed applications.
Cosmos-SDK is a blockchain framework that supports the construction of multiple assets with a consensus mechanism of POS (Proof of Stake) or POA (Proof of Authority). The goal of the Cosmos SDK is to allow developers to easily build custom blockchains from 0, while enabling the interaction with other blockchains.
Cosmos-SDK is a blockchain framework that supports the construction of multiple assets with a consensus mechanism of POS (Proof of Stake) or POA (Proof of Authority). The goal of the Cosmos SDK is to allow developers to easily build custom blockchains from 0, while enabling the interaction with other blockchains. The blockchain development framework Cosmos SDK implements general functions such as account management, community governance, and staking in a modular form. Therefore, using the Cosmos SDK to build a public chain can simplify development procedures and facilitate operation. Tendermint is a fixed protocol in a partially synchronized environment, which can achieve throughput within a delay range of the network and each process itself. The CoinEx public chain is developed based on both, improving the performance and operability of the blockchain. The SDK packaging further reduces considerations of non-related logic and reduces the complexity of developers creating. The two components of Tendermint and Cosmos SDK are connected and interacted through the Application Blockchain Interface.
Cosmos SDK and Tendermint interworking structure，Source:CoinEx; TokenInsight
2.3 Project public chain planningThe development plan of the CoinEx public chain is to create a series of public chains with specific application directions, including:
2.4 Operation analysis“ The CoinEx platform publishes monthly ecosystem reports with high transparency; but the monthly reports are limited to contents about transactions and development, and lack progress in ecosystem and community construction, making them relatively simple.
2.4.1 Disclosure of ecosystem information
Operational risks have a direct impact on platform users. Whether platform operations are smooth and whether there is transparency are issues that platform users care about.
The CoinEx platform was established in 2017 and has around 3 years of development. It is also one of the platforms that has been developing for a long time in the exchange industry. It has obtained a digital currency trading license issued by the Estonian Financial Intelligence Unit (FIU), and the platform’s compliance is guaranteed to some degree.
The actual operation of the CoinEx platform will be displayed in the form of ecosystem monthly reports. The monthly report contains various types of content such as online currencies, new activities, plans for the next month, and ecosystem dynamics. It involves multiple business dimensions including the CoinEx exchange, CoinEx Public Chain, and CET token.
Snippet of a CoinEx ecosystem monthly report，Source: CoinEx; TokenInsight
CoinEx Chain released its development roadmap for the four quarters of 2020 in January 2020. The roadmap shows that CoinEx Chain will undergo major updates on smart contracts and DEX hard fork upgrades. The project roadmap is basically planned on a monthly basis, with a clear plan and a clear direction of development.
CoinEx Public Chain 2020 Development Roadmap，Source: CoinEx; TokenInsight
In addition to the development route planned in the roadmap, CoinEx public chain also discloses its goals for next month in its monthly ecological report. The project’s main net was launched online in November 2019. According to TokenInsight’s review of the development of CoinEx public chain from January to April and the disclosure of the project’s ecosystem monthly report, the project’s plan about development of the smart contract Demo in February failed to be completed as planned; the project completed launching of the new version of the blockchain browser and the Asian Atlantis upgrade; the smart contract virtual machine development was planned to be completed in April, but the progress related to supporting cross-chain agreements was not disclosed yet.
Overall, the project’s development route planning is clear, and the project’s development schedule is consistent with the plan, but there are still some discrepancies. Operation and development information is disclosed every month, and information transparency is high.
3. Industry & CompetitorsThe earliest origin of the exchange layout in the public chain field began in early 2018 when Binance released an announcement to start the development of the Binance Public Chain officially. In June of the same year, Huobi announced at its brand upgrade conference that it will combine the technical capabilities of the Huobi technical team and the community developers to develop the Huobi public chain called “Huobi Chain”. In December of the same year, OK Group announced the launch of its self-developed public chain OKchain, dedicating to provide underlying technical support and services for startups stationed in B-Labs.
The successful launch of the public chain brings huge strategic significance to the exchange, which can not only improve the performance of the existing business of the exchange but also achieve further expansion of its influence. As one of the most important blockchain infrastructures, the public chain can benefit the exchanges behind it.
As a platform for developing public chain technology exchanges, CoinEx’s main competitors in the field of public chain development include Binance, Huobi, and OKEx. Although they are all exchange platforms for deploying public chains, the above four are different in terms of specific functions, economic models, and critical points of the public chain.
3.1 Development progress comparisonIn 2019, Binance became the first exchange to launch a public chain among all digital asset exchanges, and its main product is Binance exchange (DEX). In April 2020, Binance announced the launch of a second smart contract chain, using Ethereum’s virtual machine, so that developers can build decentralized applications without affecting the performance and functionality of their original chain.
OKEx launched OKChain’s testnet in February 2020 and completed open source two months later. OKChain is designed as the basis of large-scale blockchain-driven business applications, with the characteristics of source code decentralization, point-to-point, irreversibility, and efficient autonomy.
Huobi released Huobi Chain for the first time in July 2019, the code is open source, and the testnet was released in February 2020. As a “regulator-friendly financial blockchain”, Huobi Chain focuses on providing compliance services for companies and financial institutions.
The CoinEx public chain officially completed the main online launch in November 2019 and completed the new block browser’s launch in March 2020. On April 3, 2020, CoinEx DEX uploaded the underlying code to Github to achieve open source. The CoinEx public chain is more inclined to build a full DEX ecosystem to achieve a one-stop solution for issuing, listing, storing, and trading. The long-term goal is to create a blockchain financial infrastructure.
3.2 Comparison of economic modelsAt present, the exchange is more inclined to use its existing platform currency as the native token of the public chain in the construction of public chain ecology. CoinEx’s CET, Binance’s BNB, and Huobi’s HT all fall into this category. OKEx is the only exchange that issues new tokens for its OKChain, which means OKT is the only ‘inflation token’ in the exchange’s public chain, while CET, HT, and BNB are all deflationary.
3.3 Decentralization of public chainThe initial number of CoinEx public chain verification nodes is 42, which is currently the most decentralized among all exchange public chains, and able to take both efficiency and decentralization into account; OKChain also currently has a relatively high degree of decentralization in the exchange public chain (21 verification nodes), its nodes have a high degree of autonomy; by contrast, Binance still firmly controls the operation of nodes and transactions; In terms of encourages cooperation between regulators and the private financial aspects, Huobi provides a lesser degree of decentralization. Huobi Chain uses a variant of the DPoS consensus algorithm to provide functions such as “supervision nodes”, allowing regulators to become validators.
Comparison of some dimensions of CoinEx, Huobi, Binance and OKEx public chain，Source: TokenInsight
4. Token EconomyCoinEx Token (CET) is a native token of the CoinEx ecosystem. It was issued in January 2018. Token holders can enjoy some user value-added services within the ecosystem. Currently, it is mainly used as a native token on the CoinEx Chain. As of 11 am on April 23, 2020, the current circulation of CET tokens in the market is 3,215,354,906.31, with a total of 5,842,177,609.53. CET tokens will not be further issued or inflated. Currently, daily repurchase and quarterly destruction are carried out. The repurchase destruction dynamics can now be tracked real-time on the CET repurchase system on the platform.
4.1 Token DistributionThe CET token used to be based on the ERC-20 token developed by Ethereum. Since the CoinEx Chain mainnet was launched in November 2019, some ERC-20 CET tokens have been mapped to the mainnet CET, and the rest of the CET will be mapped before November 10, 2020. CET holders need to deposit ERC-20 CET to the COinEX exchange, and the exchange will conduct the main network mapping.
At present, CET is mainly circulated in the form of mainnet tokens, and only a small portion of ERC-20 CET has not been mapped. The distribution of token holdings currently circulating on the mainnet can be seen in the figure below. At present, the number of tokens held by the top ten holders accounts for about 60.44% of all mainnet CET tokens.
Distribution of CET token holding addresses，Source: Etherscan; TokenInsight
The following figure shows the initial distribution of tokens after the mainnet mapping preset by CoinEx. From the initial distribution map of CET, it shows that, after mapping, a large portion of CET remains concentrated in the hands of the team (31%), and the actual number of CET circulating in the market only accounts for 49% of the total.
The initial distribution of CET token，Source: CoinEx; TokenInsight
After the main net mapping, the 31% of the total CET (1.8 billion) held by the team will be gradually unlocked in the five years from 2020 to 2024, and 360 million CET will be unlocked each year. By 2024, the CET held by the team will be completely unlocked. From the current CET dynamics, the CET share held by some teams has been used for destruction purposes to achieve the purpose of CET austerity. If the frozen 1.8 billion CET held by the team are used for similar purposes, the development of CET and its platform can benefit from it.
Team’s CET unlocking plan，Source: CoinEx; TokenInsight
4.2 Token economic model4.2.1 Deflation mechanism
Since the CET token went online in January 2018, CoinEx has increased the circulation of CET through airdrops, transaction fee refunds, operation promotion, and team unlocking. As one of the existing platform coins with long development time, the deflation mechanism of CET token has undergone a series of changes with the development of the industry. In 2018, when the concept of coin-based mining prevailed, CET used transaction mining, stake mining, and pending order mining, which were cancelled in October, December and, April respectively of the following year.
The repurchase and destruction model currently used by CET was updated by CoinEx on April 11, 2020. The original CET quarterly repurchase and destruction policy of the platform will be adjusted to daily repurchase and quarterly destruction. After the implementation of the daily repurchase policy, CoinEx will take out 50% of the daily fee income for CET repurchase in the secondary market and implement quarterly destruction until the total remaining circulation is 3 billion (currently about 5.8 billion).
At the same time that CoinEx updated the repurchase and destruction plan on April 11, the platform also launched a page dedicated to displaying CET repurchase information, so that users can clearly understand the progress of CET repurchase and destruction.
As of April 23, 2020, the platform has destroyed 4,157,822,390.46 CET tokens, accounting for 41.6% of the initial total issuance. At the end of January 2019, it had destroyed 4 billion CETs (single destruction volume peak) at the end of this quarter. The number of CETs to be destroyed is 3,422,983.56.
CET historical destruction data，Source: CoinEx; TokenInsight
4.2.2 Application scenarios
The current usage scenarios of CET are discounted platform transaction fees, VIP services, special activities rights and interests, CoinEx Chain internal circulation fuel, and use of external scenarios.
Deduction and discount of platform transaction fees
CoinEx platform users can use CET to deduct transaction fees when conducting transactions within the platform. At the same time, using CET to pay transaction fees can enjoy the exclusive preferential rates provided by the platform.
CET fee discount amount，Source：CoinEx; TokenInsight
Holding a certain number of CETs can make a user become a platform VIP user. Users can also use CET to purchase platform VIPs to obtain corresponding privileges such as discounted rates, accelerated withdrawals, and exclusive customers.
Special activity rights
CET holders can enjoy special rights and interests in platform marketing activities, such as participating in the airdrop of tokens on the platform or accelerating opportunities for high-quality projects.
CoinEx Chain built-in token
CET will serve as a native token of CoinEx Chain, circulate and serve as fuel in CoinEx Chain, and users can also use CET to invest or trade other digital assets. In addition, CET can also serve as transaction fees and function fees (issuing Token, creating new trading pairs, account activation), etc. in the platform, and users can also participate in the campaign of validators by staking CET tokens.
CET is currently used as a circulation token as well for CoinEx DEX to issue tokens, create orders, Bancor, address activation, set address aliases, and other application scenarios.
In general, the types of application scenarios of CET are not plenty enough. In order to better develop the internal ecosystem of the platform, it is necessary to design and develop more CET usage scenarios and incentive mechanisms to increase the retention rate of users while adding new users.
4.2.3 Token incentive
As the native token of the CoinEx public chain, CET will be used as a block incentive to increase community participation after the mainnet of the public chain launched. The 315 million CET held by the foundation in the total CET issuance will be used to incentivize initial verification nodes and Staking participants.
CET annual incentive information，Source：CoinEx; TokenInsight
5. Team & Partners
5.1 Core team membersAmong the core team members of CoinEx, the technical members account for a relatively large proportion. The technical team’s overall ability is good and the team members have different technical experience backgrounds including cryptography, underlying protocols, marketing, and operations. The team has rich blockchain industry experience, especially the chief developer, who has about 13 years of development industry experience.
5.2 Investment institutions and partnersCoinEx’s investment is led by Bitmain and its main partners include Matrixport, Bitcoin.com, CoinBull, Consensus Lab, BTC.com, BTC.top, Hoo Exchange, Wa Yi, ChainFor.com, etc.
Investment institutions and major partners have rich experience in the industry, which can promote the development of projects to a certain extent. However, the current industry involved by the partners is not wide enough, and it will have a limited role in promoting the future of CoinEx’s enriching business lines and increasing ecosystem functions.
6. Community AnalysisAccording to TokenInsight’s research of the CoinEx platform community, as of April 23, 2020, its official Twitter has 19,800 followers and 932 tweets; the official Telegram has 45 official groups, 3 in Chinese and English, and the other is Korean, Arabic, Vietnamese, Indian and other small language groups, with a total number of 56088 people; the current number of followers on Facebook accounts is 3,107. The overall community followers still have a lot of room for improvement, and community activeness needs to be improved.
Number of followers on the CoinEx social platform，Source:TokenInsight
At present, the project’s search popularity and official website visits are both top-notch, and monthly visits have slowly returned to their previous visit levels after experiencing a significant decline in December 2019.
CoinEx visit popularity，Source: TokenInsight, Similarweb, Google
At present, the visitors of the CoinEx website are distributed in multiple countries, and there are no visits concentration from a single country or region. Therefore, CoinEx’s comprehensive global influence is widely distributed and has a reasonable degree of internationalization.
CoinEx official website’s top 5 countries by number of visitors，Source: CoinEx, TokenInsight
Click here to register on CoinEx!
This is the second post of our Spreading Crypto series where we take a deep dive into what it’ll take to help this technology reach broader adoption.submitted by mickhagen to genesisblockhq [link] [comments]
Mick exploring the state of apps in crypto
Our previous post explored the history of protocols and how they only become widely adopted when a compelling application makes them more accessible and easier to use.
Crypto will be no different. Blockchain technology today is mostly all low-level protocols. As with the numerous protocols that came before, these new, decentralized protocols need killer applications.
So, how’s that going? Where is crypto’s killer application? What’s the state of application development within our industry? Today we’ll try to answer those questions. We’ll also take a close look at decentralized applications — as that’s where a lot of the developer energy and focus currently is. Let’s dive in.
Popular Crypto ApplicationsThe most popular crypto applications today are exchanges like Coinbase and Binance — each with tens of millions of users. Other popular crypto exchanges include Kraken, Bitstamp, Gemini, and Bitfinex. In recent years, new derivatives platforms have emerged like FTX and Deribit.
Beyond the fact that the most popular crypto applications are all used for speculation, another common thread is that they are all centralized.A centralized application means that ultimate power and control rests with a centralized party (the company who built it). For example, if Coinbase or Binance wants to block you from withdrawing your funds for whatever reason (maybe for suspicious activity or fraud), they can do that. They have control of their servers so they have control of your funds.
Most popular applications that we all use daily are centralized (Netflix, Facebook, Youtube, etc). That’s the standard for modern, world-class applications today.
Decentralized ApplicationsEven though the most popular crypto applications are all centralized, most of the developer energy and focus in our industry is with decentralized applications (dApps) and non-custodial products.
These are products where only the user can touch or move funds. Not even the company or developer who built the application can access or control or stop funds from being moved. Only the user has control.
These applications allow users to truly become their own bank and have absolute control of their money.They also allow users to perform blockchain transactions and interact directly with decentralized protocols. Some of the most popular non-custodial products include Ledger, MetaMask, and MyCrypto (#ProudInvestor).
While the benefits of this type of application are obvious (user has full control of their funds), it comes with a lot of tradeoffs. We will cover that later in this post.
Libertarianism + CryptoIf the most popular applications tend to be centralized (inside and out of crypto), why is so much of our community focused on building decentralized applications (dApps)? For the casual observer, that’s a reasonable, valid question.
“Not your keys, not your coins.”This meme is endlessly repeated among longtime crypto hodlers. If you’re not in complete control of your crypto (i.e. using non-custodial wallets or dApps), then it’s not really your crypto.
Engrained in the early culture of Bitcoin has always been a strong distrust for centralized authority and power — including the too-big-to-fail government-backed financial system. In the midst of the Financial Crisis, Satoshi Nakamoto included this headline in Bitcoin’s genesis block: “Chancellor on brink of second bailout for banks.” There has always been a close connection between libertarianism & cryptocurrency.
So it’s no surprise that much of the crypto developer community is spending their time building applications that are non-custodial or decentralized. It’s part of the DNA, the soul, the essence of our community.
Personal ExperienceWhen I was at Mainframe, we built Mainframe OS — a platform that developers use to build and launch decentralized applications (dApps). I’m deeply familiar with what’s possible and what’s not in the world of dApps. I have the battle scars and gray hair to prove it. We’ve hosted panels around the various challenges. We’ve even produced videos poking fun at how complicated it is for end-users to interact with.
After having spent three years in the trenches of this non-custodial world, I no longer believe that decentralized applications are capable of bringing crypto to the masses.While I totally understand and appreciate the ethos of self-sovereignty, independence, and liberty… I think it’s a terrible mistake that as a community we are spending most of our time in this area of application development. Decentralized applications will not take crypto to the masses.
Overwhelming FrictionThe user friction that comes with decentralized applications is just too overwhelming. Let’s go through a few of the bigger points:
What Our Industry Has WrongDecentralized applications will always have a place in the market — especially among the most hardcore crypto people and parts of the world where these tools are essential. I’m personally an active user of many non-custodial products. I’m a blockchain early-adopter, I like to hold my own money, and I’m very forgiving of suboptimal UX.
However, I’m not afraid to say the poop stinks. Decentralized applications simply cannot produce the type of product experience that mainstream consumers expect.If the goal is growth and adoption, as a community I believe we’re barking up the wrong tree. We are trying to make fetch happen. It isn’t gonna happen. Our Netscape Moment is unlikely to arrive as long as we’re focused on decentralized applications.
\"Mean Girls\" movie
There’s a reason why the most popular consumer applications are centralized (Spotify, Amazon, Instagram, etc). There’s a reason why the most popular crypto applications are centralized (Coinbase, Binance, etc).
The frameworks, tooling, infrastructure, and services to support these modern, centralized applications are mature and well-established. It’s easier to build apps that are fast & performant. It’s easier to launch apps that are convenient and on all form-factors (especially mobile). It’s easier to distribute and promote via all the major app store channels (iOS/Android). It’s easier to patch, update, and upgrade. It’s easier to experiment and iterate.
It’s easier to design, build, and launch a world-class application when it is centralized! It is why we’ve chosen this path for Genesis Block.---
Other Ways to Consume This Content:
Have you already downloaded the app? We're Genesis Block, a new digital bank that's powered by crypto & decentralized protocols. The app is live in the App Store (iOS & Android). Get the link to download at https://genesisblock.com/download
submitted by D-platform to u/D-platform [link] [comments]
1. What is Bitcoin (BTC)?
2. Bitcoin’s core featuresFor a more beginner’s introduction to Bitcoin, please visit Binance Academy’s guide to Bitcoin.
Unspent Transaction Output (UTXO) modelA UTXO transaction works like cash payment between two parties: Alice gives money to Bob and receives change (i.e., unspent amount). In comparison, blockchains like Ethereum rely on the account model.
Nakamoto consensusIn the Bitcoin network, anyone can join the network and become a bookkeeping service provider i.e., a validator. All validators are allowed in the race to become the block producer for the next block, yet only the first to complete a computationally heavy task will win. This feature is called Proof of Work (PoW).
The probability of any single validator to finish the task first is equal to the percentage of the total network computation power, or hash power, the validator has. For instance, a validator with 5% of the total network computation power will have a 5% chance of completing the task first, and therefore becoming the next block producer.
Since anyone can join the race, competition is prone to increase. In the early days, Bitcoin mining was mostly done by personal computer CPUs.
As of today, Bitcoin validators, or miners, have opted for dedicated and more powerful devices such as machines based on Application-Specific Integrated Circuit (“ASIC”).
Proof of Work secures the network as block producers must have spent resources external to the network (i.e., money to pay electricity), and can provide proof to other participants that they did so.
With various miners competing for block rewards, it becomes difficult for one single malicious party to gain network majority (defined as more than 51% of the network’s hash power in the Nakamoto consensus mechanism). The ability to rearrange transactions via 51% attacks indicates another feature of the Nakamoto consensus: the finality of transactions is only probabilistic.
Once a block is produced, it is then propagated by the block producer to all other validators to check on the validity of all transactions in that block. The block producer will receive rewards in the network’s native currency (i.e., bitcoin) as all validators approve the block and update their ledgers.
Block productionThe Bitcoin protocol utilizes the Merkle tree data structure in order to organize hashes of numerous individual transactions into each block. This concept is named after Ralph Merkle, who patented it in 1979.
With the use of a Merkle tree, though each block might contain thousands of transactions, it will have the ability to combine all of their hashes and condense them into one, allowing efficient and secure verification of this group of transactions. This single hash called is a Merkle root, which is stored in the Block Header of a block. The Block Header also stores other meta information of a block, such as a hash of the previous Block Header, which enables blocks to be associated in a chain-like structure (hence the name “blockchain”).
An illustration of block production in the Bitcoin Protocol is demonstrated below.
Block time and mining difficultyBlock time is the period required to create the next block in a network. As mentioned above, the node who solves the computationally intensive task will be allowed to produce the next block. Therefore, block time is directly correlated to the amount of time it takes for a node to find a solution to the task. The Bitcoin protocol sets a target block time of 10 minutes, and attempts to achieve this by introducing a variable named mining difficulty.
Mining difficulty refers to how difficult it is for the node to solve the computationally intensive task. If the network sets a high difficulty for the task, while miners have low computational power, which is often referred to as “hashrate”, it would statistically take longer for the nodes to get an answer for the task. If the difficulty is low, but miners have rather strong computational power, statistically, some nodes will be able to solve the task quickly.
Therefore, the 10 minute target block time is achieved by constantly and automatically adjusting the mining difficulty according to how much computational power there is amongst the nodes. The average block time of the network is evaluated after a certain number of blocks, and if it is greater than the expected block time, the difficulty level will decrease; if it is less than the expected block time, the difficulty level will increase.
What are orphan blocks?In a PoW blockchain network, if the block time is too low, it would increase the likelihood of nodes producingorphan blocks, for which they would receive no reward. Orphan blocks are produced by nodes who solved the task but did not broadcast their results to the whole network the quickest due to network latency.
It takes time for a message to travel through a network, and it is entirely possible for 2 nodes to complete the task and start to broadcast their results to the network at roughly the same time, while one’s messages are received by all other nodes earlier as the node has low latency.
Imagine there is a network latency of 1 minute and a target block time of 2 minutes. A node could solve the task in around 1 minute but his message would take 1 minute to reach the rest of the nodes that are still working on the solution. While his message travels through the network, all the work done by all other nodes during that 1 minute, even if these nodes also complete the task, would go to waste. In this case, 50% of the computational power contributed to the network is wasted.
The percentage of wasted computational power would proportionally decrease if the mining difficulty were higher, as it would statistically take longer for miners to complete the task. In other words, if the mining difficulty, and therefore targeted block time is low, miners with powerful and often centralized mining facilities would get a higher chance of becoming the block producer, while the participation of weaker miners would become in vain. This introduces possible centralization and weakens the overall security of the network.
However, given a limited amount of transactions that can be stored in a block, making the block time too longwould decrease the number of transactions the network can process per second, negatively affecting network scalability.
3. Bitcoin’s additional features
Segregated Witness (SegWit)Segregated Witness, often abbreviated as SegWit, is a protocol upgrade proposal that went live in August 2017.
SegWit separates witness signatures from transaction-related data. Witness signatures in legacy Bitcoin blocks often take more than 50% of the block size. By removing witness signatures from the transaction block, this protocol upgrade effectively increases the number of transactions that can be stored in a single block, enabling the network to handle more transactions per second. As a result, SegWit increases the scalability of Nakamoto consensus-based blockchain networks like Bitcoin and Litecoin.
SegWit also makes transactions cheaper. Since transaction fees are derived from how much data is being processed by the block producer, the more transactions that can be stored in a 1MB block, the cheaper individual transactions become.
The legacy Bitcoin block has a block size limit of 1 megabyte, and any change on the block size would require a network hard-fork. On August 1st 2017, the first hard-fork occurred, leading to the creation of Bitcoin Cash (“BCH”), which introduced an 8 megabyte block size limit.
Conversely, Segregated Witness was a soft-fork: it never changed the transaction block size limit of the network. Instead, it added an extended block with an upper limit of 3 megabytes, which contains solely witness signatures, to the 1 megabyte block that contains only transaction data. This new block type can be processed even by nodes that have not completed the SegWit protocol upgrade.
Furthermore, the separation of witness signatures from transaction data solves the malleability issue with the original Bitcoin protocol. Without Segregated Witness, these signatures could be altered before the block is validated by miners. Indeed, alterations can be done in such a way that if the system does a mathematical check, the signature would still be valid. However, since the values in the signature are changed, the two signatures would create vastly different hash values.
For instance, if a witness signature states “6,” it has a mathematical value of 6, and would create a hash value of 12345. However, if the witness signature were changed to “06”, it would maintain a mathematical value of 6 while creating a (faulty) hash value of 67890.
Since the mathematical values are the same, the altered signature remains a valid signature. This would create a bookkeeping issue, as transactions in Nakamoto consensus-based blockchain networks are documented with these hash values, or transaction IDs. Effectively, one can alter a transaction ID to a new one, and the new ID can still be valid.
This can create many issues, as illustrated in the below example:
Since the transaction malleability issue is fixed, Segregated Witness also enables the proper functioning of second-layer scalability solutions on the Bitcoin protocol, such as the Lightning Network.
Lightning NetworkLightning Network is a second-layer micropayment solution for scalability.
Specifically, Lightning Network aims to enable near-instant and low-cost payments between merchants and customers that wish to use bitcoins.
Lightning Network was conceptualized in a whitepaper by Joseph Poon and Thaddeus Dryja in 2015. Since then, it has been implemented by multiple companies. The most prominent of them include Blockstream, Lightning Labs, and ACINQ.
A list of curated resources relevant to Lightning Network can be found here.
In the Lightning Network, if a customer wishes to transact with a merchant, both of them need to open a payment channel, which operates off the Bitcoin blockchain (i.e., off-chain vs. on-chain). None of the transaction details from this payment channel are recorded on the blockchain, and only when the channel is closed will the end result of both party’s wallet balances be updated to the blockchain. The blockchain only serves as a settlement layer for Lightning transactions.
Since all transactions done via the payment channel are conducted independently of the Nakamoto consensus, both parties involved in transactions do not need to wait for network confirmation on transactions. Instead, transacting parties would pay transaction fees to Bitcoin miners only when they decide to close the channel.
One limitation to the Lightning Network is that it requires a person to be online to receive transactions attributing towards him. Another limitation in user experience could be that one needs to lock up some funds every time he wishes to open a payment channel, and is only able to use that fund within the channel.
However, this does not mean he needs to create new channels every time he wishes to transact with a different person on the Lightning Network. If Alice wants to send money to Carol, but they do not have a payment channel open, they can ask Bob, who has payment channels open to both Alice and Carol, to help make that transaction. Alice will be able to send funds to Bob, and Bob to Carol. Hence, the number of “payment hubs” (i.e., Bob in the previous example) correlates with both the convenience and the usability of the Lightning Network for real-world applications.
Schnorr Signature upgrade proposalElliptic Curve Digital Signature Algorithm (“ECDSA”) signatures are used to sign transactions on the Bitcoin blockchain.
However, many developers now advocate for replacing ECDSA with Schnorr Signature. Once Schnorr Signatures are implemented, multiple parties can collaborate in producing a signature that is valid for the sum of their public keys.
This would primarily be beneficial for network scalability. When multiple addresses were to conduct transactions to a single address, each transaction would require their own signature. With Schnorr Signature, all these signatures would be combined into one. As a result, the network would be able to store more transactions in a single block.
The reduced size in signatures implies a reduced cost on transaction fees. The group of senders can split the transaction fees for that one group signature, instead of paying for one personal signature individually.
Schnorr Signature also improves network privacy and token fungibility. A third-party observer will not be able to detect if a user is sending a multi-signature transaction, since the signature will be in the same format as a single-signature transaction.
4. Economics and supply distributionThe Bitcoin protocol utilizes the Nakamoto consensus, and nodes validate blocks via Proof-of-Work mining. The bitcoin token was not pre-mined, and has a maximum supply of 21 million. The initial reward for a block was 50 BTC per block. Block mining rewards halve every 210,000 blocks. Since the average time for block production on the blockchain is 10 minutes, it implies that the block reward halving events will approximately take place every 4 years.
As of May 12th 2020, the block mining rewards are 6.25 BTC per block. Transaction fees also represent a minor revenue stream for miners.
Explore Kraken vs Binance honest comparison with real facts & numbers. See our Kraken vs Binance comparison and pick the best exchange option. Binance was created after attracting funds via an ICO (Initial Coin Offering – creating a new digital asset, backed by the project). The BNB tokens can now be traded on the exchange, or used as a method of paying your trading fees, which will reduce them by 50%. Additionally a small portion of the coin has to be paid to the company to cast ... The most liquid UK bitcoin exchange. 100% multi-signature underground cold storage. Immediate bitcoin withdrawals up to 2 XBT from Advance Withdrawal fund. No bitcoin deposit or withdrawal fees. Minimum deposit amount 1000 EUR/GBP/PLN/USD. Cryptopia: cryptopia.co.nz: $2,000,000 0.2% 0.2% ????? Gatecoin: gatecoin.com: $19,000,000 0.25%: 0.35% 20 Yes Yes No No HKD Yes Yes Hong-Kong regulated ... Coinbase vs Binance cryptocurrency exchange overall score comparison reveals that Coinbase has a higher overall score of 9.8, while Binance gathered an overall score of 9.6. If we look at the ease of use, it’s clear that in this Coinbase vs Binance comparison, Coinbase has better & smoother user experience than Binance. With the ever-increasing popularity of bitcoin, you – like millions of other people around the world – may be looking to cash in on the cryptocurrency, too.In order to do so, the first thing you need to do is find a reputable bitcoin exchange.That’s not as easy as it sounds, though. New bitcoin exchanges come onto the scene on a regular basis. Binance Fees. Binance charges 0.10% maker/taker fees. Also, you get to pay 0.0005 BTC for withdrawal. To get funds from the exchange, you can either make use of the option of credit cards or cryptocurrency. You cannot get funds through wire transfer nor can U.S. investors able to get funds as well. Binance Deposit Fees – zero Binance was created after attracting funds via an ICO (Initial Coin Offering – creating a new digital asset, backed by the project). The BNB tokens can now be traded on the exchange, or used as a method of paying your trading fees, which will reduce them by 50%. Additionally a small portion of the coin has to be paid to the company to cast ...
[index]          
I've been a longtime user of Bittrex which has been my favorite crypto exchange, Binance is a newer exchange with lower fees, and Kraken . . well their site ... SUBSCRIBE if you enjoy these type of videos! Thanks for watching! Twitter: https://twitter.com/TheCryptoviser Join Coinbase & Get Free Bitcoin: https://www.c... New Binance exchange tutorial 2020. How to deposit and withdraw, how to use the exchange itself and we also discuss some more features of the Binance platfor... In this video we explore what crypto trading fees CryptoHopper and cryptocurrency exchanges like Binance, Coinbase, Kraken, Bittrex and HitBTC charge. Get Your Free Trail Cryptohopper Trading Bot ... Since cryptocurrency first appeared, a plethora of exchange platforms have sprung up to facilitate transfers of digital coins such as Bitcoin, Ethereum and other altcoins. Cryptocurrency exchanges ... Binance Singapore VS CoinHako Pros & Cons How fast is the exchange? Just a review / comparison of Binance Singapore and Coinhako, you decide on your own which exchange suit you best or do ... 🎥: Top 4 Exchanges To Buy Bitcoin & Cryptocurrencies For Beginners! 🚩: Binance Exchange (My Favourite): 👉 https://www.binance.com/en/register?ref=RMY9N5F0 Best Crypto Exchange- ZERO FEES HACK - Duration: ... Binance, & Bittrex - Which Crypto Exchange To Use in 2019 - Duration: 41:22. The Cryptoviser 13,365 views. 41:22. YESS!! BITCOIN SMASHING ... Binance vs Bittrex compared side-by-side to determine which exchange is best for trading cryptocurrency. After reviewing each exchange, there is a clear winner for buying and selling altcoins. I compare Binance vs Coinbase side-by-side to determine which exchange is the best platform for trading cryptocurrency. My answer may surprise you! I strateg...